====== WebOS ======
===== Firmwares =====

==== WebOS firmware links by system ====


  *  webOS2 (only model 75UH5C-BF) **[[http://66.171.166.61:5000/sharing/LxUaCkV2h | 03.80.20 ]]**
  *  webOS2     **[[http://66.171.166.61:5000/sharing/9HClMYmOz|03.31.80]]**
  *  webOS3     **[[http://66.171.166.61:5000/sharing/S4giwfJOc|04.73.60]]**
  *  webOS3.2  **[[http://66.171.166.61:5000/sharing/di88tuYiF|04.03.10]]**

Find all firmwares in iGotchaDrive/iGotcha Development/webOS/firmware files/

Please check this google sheet for all weboos models and firmwares 
https://docs.google.com/spreadsheets/d/1LZSVp-hj7qHCblW9jiURCGhPthdQuS7_xXTjEAq9VBY/edit?usp=sharing

===== WebOS 4+ installation guide =====

  - When you turn on your tv for the first time it will prompt you for the initial set up (time, date, region, etc)
    - Enter the info for time date and region and use base setting for the rest and then quit intial config
  - Use the settings button and go to general -> network and connect your webOS to the internet (wired or wifi)
  - The steps to get signage set up: 
    * Click settings on the remote and select "SI server settings"
    * Once in the menu set the following settings:
    * Secure connection - OFF
    * Fully Qualified Domain Name - ON and set the url to --> "http://igotcha.co/webos4.ipk"
    * Application Type - IPK
    * Application launch mode - Local
    * Local Application Upgrade - Remote
      * At this point if it is successful it will say complete, after about 5 seconds turn the screen off and then on again to allow the download to take place.
  - Once the download is finished, press the blue and enter the correct server from the dropdown menu and enter the Player ID provided to you by the tech.